DABDig Forums register | my profile | my bookmarks | my notifications | search | faqs |
|
Note: You must be registered in order to post a topic or reply.
To register, click here. Registration is FREE!
Post reply to topic: ATI MMC 9.16
(Note: Only the poster of this message, and the moderator can edit the message.)
Ok, not much updates for the ATI MMC. I've done the big upgrade and got the ATI all in wonder x1900 with a digital tuner. Works great. But dabdig doesn't really want to work too well with it. I get the following error: Error enumerating the registery value under hkey_current_user\Software\ATI Technologies\Multimedia\Features\TV\Video\analog TV Tuner If I check the registry, there is no such item... Seems obvious but just to add. Hopefully this is an easy fix. Test version on its way to you (259b14) DABDig creator II did make some good progress a while ago but got interrupted. I will have a go at doing some more over Easterr DABDig creator Hiya, Any progress on the changes for ATI MMC 9.13? I thought that more changes would be required. If you need any further info etc... I'll be happy to provide. Thanks. I've now got the one from 17:48 It will be a bit more than changing the setting I referred to above because they have moved some stuff from ...\TV to ...\DTV and added a few more fields - so I will have to spend a bit more time on this. DABDig creator Humm, will send the data again... Registry dump not yet arrived ... but take a look at the ATiMMCSource setting in dabdig.htm/dabdig.ini http://www.spidersweb.freeserve.co.uk/dab/dabdig.htm#config-ATiMMC This is what is used to index into the registry to pick up the extra info - and (in theory at least) you can override it on a per channel basis. DABDig creator However, in the meantime - try changing a setting in dabdig.ini from 1 to 0 i.e. ATiMMCExtraInfo=0 Ok, I have e-mailed you the registry info as requested. Some changes, have downgraded the ATI MMC from 9.16 to 9.13. The change in Dabdig.ini, has enabled the recording. In the ATI all in wonder x1900. there are now more than 1 channel source, you can have defaults with channels from multiple sources. ie, both analogue & digital. So I can assume that some changes may need to be made in Digiguide? Channels are numbered 2-3 and so forth.. or 20203 as an example... Hope this helps in some way. Andy Would be interesting if you could queue a recording using the native ATi softwrae and then send me a registry dump from HKEY_CURRENT_USER\Software\ATI Technologies However, in the meantime - try changing a setting in dabdig.ini from 1 to 0 i.e. ATiMMCExtraInfo=0 DABDig creator To add, I'm using the latest dabdig: 2.57b12 Edited by Andy on Saturday, February 17, 2007 - 9:45:13 AMAndy Paul Webster
Paul WebsterPaul Webster
Paul WebsterAndy Andy Paul Webster
Paul WebsterAndy Paul Webster
Paul WebsterAndy
Would be interesting if you could queue a recording using the native ATi softwrae and then send me a registry dump from HKEY_CURRENT_USER\Software\ATI TechnologiesPaul Webster
Paul WebsterAndy